| Subject | Text |
| LED's won't blink until the lamp fails. Then the voice "Check the lamp." |
| Tried a new lamp no luck still does it swapped out psu and ballast boards and it still will not fire |
|
|
| Philips 27PT6441/37 Replaced part still NG | Thanks Minnie for the detailed repair procedure because my son asked me to repair the set he owns. |
| Hitachi TV Blew out something? | Hello, Help please,
I have a 2002 Hatachi big screan tv , model # 43GX10B, was working fine.
I ho |
| projector | Hello i have an eiki lc-sd 10 and the problem is that picture is very blue istead of normal black w |
| My bet is a bad lamp. Your ballast is doing what its supposed to do. I use the Phillips PHI387SRL an |
| Fujitsu Ten car stereo in 1995 Toyota Corolla | Does any one know the voltage for the miniature lamp used to light up the clock/channel window. How |
| Are you shure thet the transformer is ok.
I have the same case replace the transformer and it's ok. |
| chassis L6.2AA philips on a 28PT4472/01 | I own the full diagram of this 70cm TV but ... it never starts.everything seems to be OK in the powe |
| Transistors with 2N marking and so low numbers are really old (early-mid sixties), so in a ballast f |
| Before dealing with the fixture and ballast, check the fixed wiring to make sure that you have no fa |
| sony kl 50w2 | After carefully moving the tv on its ''back'' to a different house, it will not turn on. I see the g |
| Sony KP-57WV600 Blue CRT driver board | Hello everyone. My dad bought a KP57WV600 tv that had a known convergence issue with the red CRT. |
| toshiba dlp 62hmx95 overheat problem plzzzzzzzzz help | I have a Toshiba DLP 62HMX95. The Tv shuts off after a couple of hours of viewing. then the red LED |
| Pix arent showing up using the img tags...hmmm.. Anyways, heres the links to the pix of my ballast. |
| no picture | 50hm66, lamp good replaced main power supply board, aux. power supply, and the lamp ballast, still n |
| tv jvc av 14fm g3b | i need help i have also the same problem the red lamp only and the power is ok on high volltage c |
|
|
| Dark Shade on Screen/ I miss my projector | [b:1c5e916565] I have a 6100 BenQ projector,when the old lamp was at the end of its time a dark sha |
| Thanks for the fast reply.
but you guys are sure this is not a problem whit the lamp or anything |
| either backlight or ballast or inverter as they call it.some sonys ballast is part of lcd.you need s |
| Re: Faulty UPS APC 650Va | hi.....you should cek your bateries using 12vdc lamp for car one by one, if the lamp is off , your b |
| Flashing green lights on a Sony KDF50E2010. | Hello [url=http://forum.eserviceinfo.com/viewtopic.php?t=41622]Strangers[/url]. :wink:
Not been |
| I have done all these DC tests and results are good yet when I connect the HOT collector and switch |
| It is probably not recommendable to use a light bulb as ballast resistor in this manner, as the resu |
| LC 4341 | 1/ check DC value (+295V DC aprx.) on the PowerSupplyBoard unit -output DC power for ballast unit
2 |
| samsung blows fuse | I have a 13 month old (conviently out of warranty) Samsung TX-T2782 TV that is used exclusively for |
| philips lc 4341 projector | hi
has anyone come across the lamp driver assembly for this model,
have tried new bulb but get n |
| Check the monitor with a flash light to see if there's a dim picture. If there's a dim picture, the |
| Hi Dan,
Those zener diodes are on the BATT_SIG (D401 on BT-006 BOARD) terminal on the BATT/STROBE |
| I take it you have checked the bulb and ballast?
It sounds like its just starting up and finding |